|
ShadeSealer-168 Pulse Sealer with MultiHead option is used to produce two seals ... 1/4-inch x 168-inch and 1/2-inch x 168-inch. Seal Illustration:
Please read all procedures and instructions before using the machine. Foregoing instructions assume all Machine Setup instructions are completed.
Operating Instructions:
- Machine On Instructions
- Heat Sealing without Automatic PocketMaker
- Heat Sealing with Automatic PocketMaker
Machine On Insturctions:
- Remove any debris from sealing areas.
- Turn on the Safety Switch.
- Turn on POWER Switch by pressing and holding POWER button for about 2 seconds. Green indicator lamp illuminates.
- Make sure Rocker Diagnostic Center indicator lamp is OFF. If the red indicator lamp is illuminated, turn each of the Rocker switches to the right or ON position as shown in the photo.
|
