2-Meter Wide Format Heat Sealer was packaged for shipping such that all critical areas were bubble-wrapped and shrink wrapped. Rocker assemblies were further secured with the addition of a 2x4 secured to the machine as shown on left.
Shipping Day: Tuesday, 7/22
Roadway driver Baker arrived at 1:30 PM and we used a forklift and hand truck to load 2-M machine into the trailer.
2-M Machine weight is not centrally balanced. Transformer section is located closer to left side of the machine. Therefore the forks of the forklift were located closer to the left side of the machine. Lift location is under the lower sealing bar. Make sure not to crimp or damage air hoses.
Roadway located the 2-M machine against the front of the trailer. As a divided load, the driver is supposed to use the wood shown to the left to secure your load in the location shown in the photo to the left.
