These Puls2™ parameters are for reference purposes only & not a performance specification. Actual parameters used will vary based on materials used and experience.
In addition to reduced cycle times, Puls2TM can also have a significant affect on increased heating element life and zone tape life.
Blackout Material |
|
PLS |
0.4 |
PWD |
0.15 |
MLPS |
12 |
COOL |
5.0 |
Total heat seal cycle time: 10.6 seconds (compared to 15 sec prior to Puls2TM upgrade.) |
Vinyl Material |
|
PLS |
0.4 |
PWD |
0.15 |
MLPS |
11 |
COOL |
4.0 |
Total heat seal cycle time: 10.0 seconds (compared to 12 sec prior to Puls2TM upgrade.) |
"4000" 3% Material |
|
PLS |
0.4 |
PWD |
0.15 |
MLPS |
18 |
COOL |
7.0 |
Total heat seal cycle time: 17.0 seconds (compared to 20.5 sec prior to Puls2TM upgrade.) |
"TempE" Material |
|
PLS |
0.4 |
PWD |
0.15 |
MLPS |
24 |
COOL |
8.0 |
Total heat seal cycle time: 21.0 seconds (compared to 30.0 sec prior to Puls2TM upgrade.) |