Novaseal Customized PulseSealer 294 was shipped from our Coconut Creek, Florida location on Thursday, June 18, 2015. Shipped through Echo Global Logistics (Freight Collect). Click here to view BOL. Pursuant to client request, PulseSealer 294 was not crated, and therefore movement of the machine should only be facilitated by means of included casters. Based on machine construction there is no good forklift position.
As shown in photo (below), 4 parcels were attached to machine in lower center position. These parcels include a spool of polyrod, and 3 boxes containing 35mil material, sealing tape, and additional polyrod. Other supplies such as heating element and zone tape will be sent separately.
Truck line used only straps to secure machine within the truck. These were the instructions provided to them by Echo.
Note that machine is wrapped in plastic stretch materials. Plastic stretch is used to hold bubble wrap against all externally facing control switches, e-stops and pneumatic center. In order to secure Primary and Secondary PulseSealing presses, both presses were secured to each other as shown in the photo inset (left), the machine and rear table with disabled TableStops. Remove strapping materials by using diagonal cutters or scissor to cut heavy duty string. Remove all packing materials.